Bagging an Accord (completed pics pg 3)

We man thAT LOOKS REALLY GOOD, i CAN TELL YOU ITS NOT EASY BAGGEN AN ACCORD i KNOW. WELL MAN i DONT KNOW HOW YOUR GOING TO GET READ OF THE STRUT BUT ON MINE THE HAD TO READ OF THE SHOCK AND MAKE A CUSTOM UPPER IN LOWER CONTROL ARM AND TAKE OUT 3/4' OUT OF THE SPINDLE AND INFORCE IT (JUST A TIP), WELL HOPE IT WORKS OUT FOR LOOKS GOOD MAN

the owner of this car is into the VIP styling, so he not looking to get all the way laid with it. I'd love to do it, but he doesn't want to right now. I give it 6months to a year & he will be back wanting to go lower

Yeah I know what its like baggin' an accord so far it looks good and just like you said Dan 6month he will want it lower

Ya I here what your saying I did the same thing and then that is when I started just cutting looks good!

i could of told you ua bags wouldn't work..whats your plan now for the front

Originally posted by 1 LoWfUKn RaM



i could of told you ua bags wouldn't work..whats your plan now for the frontthey could have worked, the reason they didn't is cause they were rubbing the upper control arm bolt heads. a few companies offer a sleeve bag setup for the accords. we are going to be running cans

any updates...

waiting on the new suspension to come in so we can finish it

I'm seriously starting to doubt the credibility of UAS. We finally got the front Cylinders in after being delayed a few weeks due to back orders & also them not coming in on the week they said they would be here. NOTICE i said fronts, & not the rears as well. So we pull everything out of the box & immediately notice the lower mounts aren't in the box. The lower mount is a bung that allows the fork to mount the to cylinder. We take a look at the upper mounts & they don't fit. Now not the spacing between the studs is off, its the spacing outwards from the center of the plate. This puts them about a 1/4" off. So now we are still at a stand still. we called the company to let them know our situation & we should find out something tomorrow, so for now, here's some pics

We finally got something accomplished!!!!!

Here's a BEFORE shot on how low the accord would have sat in the rear with the bagsVery depressing...............we know

I said a couple posts back that they sent us lower "ADJUSTABLE" cylinder mounts for the rear, well here they areNot sure how the bastards are suppose to be adjustable. Tried calling UAS all day today to find out & we said fuck it.

Notice that either nut on the 2 mounts are 2 different sizes. The square tubing mount threads on. The other mount has the nut that is 2 small & wont thread. So i hacked the bitch off & welded a new one on(not shown welded in the pic)



With all that said & done, i got some bolts from work to use to mount the upper plates since they didn't send us any. Installed everything & did a test fit & lets just say....................we are very pleased now



He can still go 2 more inches lower!!!! He will be coming back later to have the rear tubbed. Now hopefully we can get the front to look the same