need pictures of toyota trucks

788 views
14 replies
10 following
K
need pictures of toyota trucks
yota93 avatar
yota93
+1y
i want to see whats the lowest without being bagged? thanks
onehightoyota avatar
onehightoyota
+1y
depends on what year model u'r talkin about. 85-95.5 toyota pickups with the torsion bar suspension can drag reflectors up while only static dropped. turn torsion bars all the way down, mono-leaf + 3" block in the rear with a notch and it'll sit about 1.5-2" off the ground. a tacoma is a bit different. they dont make but a 3" drop kit and if you compound the 3" springs + flipped balljoints that makes 6" of drop but you are still about 5" of the ground. i have 13" of drop on my tacoma from stock ride height. and a lot of stuff done to get it that low. its not the lowest static dropped taco i'm sure but mine actually handles good to be so low.

and yes it used to lay out
smctoy avatar
smctoy
+1y
Edited: 8/1/2007 11:53:35 PM by smcprez

Dropped in the front with DJM lower control arms & reset torsoin bars. The rear is on/wasmono-leaf, blocks, airshock & small notch!
post photo
chopedmazda avatar
chopedmazda
+1y
Edited: 8/1/2007 11:55:07 PM by yota4life

its a 94 dropped without bags
post photo
yota93 avatar
yota93
+1y
yotas that are 89-95, when i first bought it i lowered it 4 inch"s it rode like crap, i am goin to do it again but the right way arms, spindles, shocks, maybe a little notch, i just wanted to see if anybody has lowered theres more than 4 inch"s thanks for the replies, pictures
standardbyker88 avatar
standardbyker88
+1y
lowered my 92 3"ish all around and i barely tuck tire. they have room for alot more. im on 195/75/14s.
groundedwatts avatar
groundedwatts
+1y
my yota before it was bagged....mono'd, 3"blocks, torsion'd in the front, bump stops removed
post photo
standardbyker88 avatar
standardbyker88
+1y
yeah, i forgot to mention i pulled my rear bumpstops and cut the fronts in half.
standardbyker88 avatar
standardbyker88
+1y
cranked the front down another inch, gotta pull the front stops. had to roll my fender lips with rib joints and a wood bat. then i bowed out the fender from the wheel. lots clearance to that now. inners are now the issue.
PIMPTACO avatar
PIMPTACO
+1y
Edited: 9/7/2007 7:51:41 PM by PIMPTACO

post photo