IFS suspension??

looks like the tie rods might need to be flipped.....

one thing that sucks about m2 spindles is they are short....

max it has extremely bad bump steer although i think i have some ideas on fixing it ...but do you have any suggestions
cris the tie rods are on correctly

it was a suggestion on correcting bad bumpsteer, not telling you how they fit...

The Scott's Hot Rod SuperSlam IFS claims up to 9" of travel. Anyone used one or know if that is correct?

that would make it worse but thanks for the suggestion

Troy- Honestly it looks like the rack is too long. Because of where the rack is mounted on Mustang II front ends, the inner tierod pivots should be about where the lower arm mounts are. I'm not sure where you could get one with the right width, but it looks like that would cure it.

WickedBird- Most of the Mustang II front ends get that much travel, it's the lack of room for the bag that is the issue.

Originally posted by WickedBird



The Scott's Hot Rod SuperSlam IFS claims up to 9" of travel. Anyone used one or know if that is correct?



that is correct. its actually around 9 7/8" though. and they are built with minimal camber issues and no bumpsteer. i work at scotts but i do sheetmetal fab. ive installed many of our front ends though, and im decently impressed by them. there are a few areas that i would like to see changed such as solid mount lowers instead of having a rod end on the end of all the control arms, but maybe with time. (we do build solid mount controls arms per request). but yeah, any questions or if you want some pictures to prove the lift let me know

what other front setup will work???

Max that is exactly what i came up with i found a place that will custom make me one and thats what i am going to do if everything i have calculated works out right it should fix alot of the bump steer

i get about 11.5 inches of lift!