where to buy?

437 views
26 replies
20 following
K
where to buy?
granth avatar
granth
+1y
Originally posted by hotwheelsgt



well i notched my bar ends with a angle grinder and it took me about an hour for all four and they are "perfect" lol...if you get 1 1/2 dom .250 wall you can almost just slide the bungs in there and weld them...that is if you are gonna be running heims or jonny joints(super pivotS) and if you want that big of bars...sure kris a avs behind her but i realy dont think she make the bars her self..avs has an atitude problem everytime i have been in there so...do what you want...

to be fully honest, it might be them with the attitude.

i said how i wanted it done, and why i wanted it done that way, thats really all to be said on the topic. this wasn't a how to thread, it was a where should i look to get my setup.
hotwheelsgt avatar
hotwheelsgt
+1y
and i was saying dont go anywhere...put your big girl panties on and just build them yourself...im sure you go in there all the time anyway...
creative concepts avatar
creative concepts
+1y
i bought my uppers from G-W.. 1" 3/16 adj.. bars were only 45 each.. their 1.5" 3/16 are the same.. i built my lowers out of 2x2x3/16 and cut my ends at work and bo ught bushings from G-W.. a 2" hole saw and a drill for the lowers. but if you're looking to buy all the bars, i'd go with gravity werx bars.
granth avatar
granth
+1y
go in where? maybe i'm lost here. As for building them myself, I HAVE looked into that. Bar ends and tabs alone would be 130 dollars. Around that. That's NO metal. So figure 40 or so for material, gas fill, wire, see my point? Not to mention the knowing a company is behind their products, so a warranty of types is there.

You do you, and I will doin me.
hotwheelsgt avatar
hotwheelsgt
+1y
good luck...but on that note those gravity werx bars are badass!!!
2600air avatar
2600air
+1y
have you checked out coolcars they usally have free shipping and are pretty reasonable.
www.coolcars.org
TwistedPhil avatar
TwistedPhil
+1y
Shipping's in really good shape right now, and we have lots of builder parts in stock- bushings, heims, bars, and our megaflex joints...
If you're shopping, email me a list and I'll get everything out the door on Tuesday!

-Phil at FBI