HELP!! my 79 Monte Carlo should be low like this....

Anyone know if the S-10 arms bolt right up on the Monte???

anybody know what to do with the rear? will the rear sit low like the regal / monte SS with bags and stock frame and stuff?

what do you think bout that?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=300049498188

NOPE you will need to cnotch it

im working on a 71 monte on air and trying to lay it out on some 20s and right now i took the springs out on stock wheels and it dosent lay out i need to notch the rear and cut the drive line tunnel higher, the front is gona need spindels .........good luck on your project

Edited: 9/6/2007 11:15:30 AM by CruizinKev

uhm sorry, but whats "notching"? I already read some stuff bout that, but its not 100% clear what does it mean...

I think "notching" is this something like what I did to a modelcar-frame, right?

That's what notching is, but I'm not sure you'll have to do it on your '79. The '71 has a different frame underneath it if I'm not mistaken.
The best way to know for sure is to take your shocks and coils out, jack up the axle, and see if you have enough drop to hit the ground!
If something stops you from going all the way down, get under there and see what it is- and get ready to cut it out of the way!

-Phil

yeah I'd do this, but I need some 20" wheels to do that testfit

THANKS FOR SHOWING THOSE CONTROL ARM PICS I AM PUTTING S10 STUFF ON MY CAPRICE ITS CLOSE ENOUGH...

...okay, I saw in another forum that I have to c-notch my rear section of the frame to laying on the ground..

Originally posted by ur2highmn



should be low like my buddy jakes

Saw that at ITB this year, makes wish I kept my Monte. JIMMY