anyone bag a 02-04 ram?

http://streetsource.com/IM/ViewUser.aspx?id=thacru78

I don't know about the art kit. Mine has a torsion bar type front setup where i cut the original cups off the frame. My inner fenders are gone, alot of stuff relocated under the hood and it needs the firewall tubbed to lay with my new wheels. My suggestion would be to get the upper arms moved when you bag it, i have put off doing it to mine for too long

like bigjon said it will lay with the arms raised but really it's not worth it just take the time to raise the arms while you are there. As for the gas tank I tossed mine in the bed and made a cover to make it look descent but I am using a fuel cell this time around.

there was a quad cab layed out on 27's at dangerzone this year

the license plate read; 27sbtch

okay. i guess we will throw it all together to see what it looks like when its layed and figure it out then. so theres nothing to do with the fuel tank except move it in the bed? noone has raised them or anything like an s10? if so, he said he will buy a fuel cell but we are trying to work around that.

everything they have told you above is true. the trans crossmember needs to be changed also you can cut and plate the a arm crossmember like bill did mine and lay it out without having to go through the trouble of z'ing the frame if you can live with the whole 1/2 inch higher it will be just look at the pics of mine and see if you can tell. the ac line also will hit the tire with a 22 but anyone can make a new line for you to remedy this. the computer has to be moved and also the cruise and you have to move the abs over slightly for the tires to clear. your gonna have to trim the firewall slightly and also the inner fender brace that runs to the core support i can send you a few pics if you think you might need them

Originally posted by D Menis



everything they have told you above is true. the trans crossmember needs to be changed also you can cut and plate the a arm crossmember like bill did mine and lay it out without having to go through the trouble of z'ing the frame if you can live with the whole 1/2 inch higher it will be just look at the pics of mine and see if you can tell. the ac line also will hit the tire with a 22 but anyone can make a new line for you to remedy this. the computer has to be moved and also the cruise and you have to move the abs over slightly for the tires to clear. your gonna have to trim the firewall slightly and also the inner fender brace that runs to the core support i can send you a few pics if you think you might need them

awesome! you answered pretty much all my questions.. is your truck bodydropped? or just the bumper hang down that far? and did you have to narrow your rear end?

oh and you moved your upper control arms up 3 inches too? cause the neg camber looks good. does it change the amount of lift you get with the upper moved up? i would think that the balljoint would bind because its at a different angle, but then again, i dont know because ive never done a ram.

ill be sure to post progress pictures of the build once we start

I'm surprised BIG has not hit up this thread yet. He makes laser cut brackets to raise your uppers and also make dodge specific fuel cells and lower control arms.

I raised my tank in the stock location at first. It got further out of the way but it still layed on it so its in the bed til i build a fuel cell