pic request "josh freemans yota"

These are the best pictures I have of the angle iron that supports whats left of the door sill and how my floor attaches to it. Hard to see but you get the idea, the bottom of the angle iron sits flush with the bottom of the doors.

are these the new floor and work this time?

yeah thats what the truck looks like right now.

mabe one day mine will be as bad ass as yours...so you could run 18's layin door? also are you goona have a stock hood or cowl ...i think im just gonna build a cowl for mine right now with the 3 in bodydrop it sticks threw the whole i but about a 1/2 inch so ill just build a cowl when it comes time

donny what bumper is on the white king cab

heres a close up of a doored yota...

Originally posted by layedoutb2k





I dont think you can fit a 215/35/18 and lay true door like the truck above. If i remember corectly the 18s on this truck were above the fenders.

In this picture you can kinda see how he trimed the top of the fender to clear the tire

Mine truly lays door, as pictured below, and the tire is damn near the top of the fender, as pictured below. Its a 204/40/17 AND its almost bald on the outside edge, if it were a new tire I think it might be above the fender, plus a 215/35/18 is .40in. taller than my 205/40/17 so I think skyler is correct, an 18" would stick up above the fender just a little bit on a truly doored truck.

As for my hood, I lowered the engine a bit but Im not going to bother with a cowl or trying to fit the stock hood, Ill probably cut out my stock hood.

205/40/17 almost bald on the outside edge