93 lexus sc 400 engine

^^^^^That truck is in the construction zone part of MT this month.....the guy is from australia.

Edited: 10/27/2007 2:42:37 AM by doberman6220

Thats funny. Thanks for the help brutha.

That truck can also be found on this site....
www.downundertruckin.com

right on, thanx

Originally posted by HarryBalls



Here's a naturally aspirated lexus v-8 in a '93 hi-lux



groundlevel minitrucks australia.my gl bro naths truck.

you will find a heap of pics on DUT. i have put 1uz onto my lux frame, needed to fab up new engine mounts, nothing too hard, section the sump and mod the oil pickup, these engine come out with 3 different sumps, ones front, middle and rear, you need a front sump. need to fab up a bracket to mount the gearbox, i made a bracket that mounted off the front of the lux one, before i made a new crossy, you will need a new tailshaft made up. I am running a new bosch external fuel pump and a b&m shifter, as for fitment between the lux chasis you really need to run the stock headers, which are the worste looking headers in the world, super restrictive and just look like a single pipe with 4 little outlets, but lets you get the engine sitting nice and low. the 1uz also have a couple of different headers depending on what it came out of. you will also need a electronic speedo. think thats all.

Thats great info, thanx

I have a 94 Lexus SC400 eng/trans with 122,000 miles on it,i also have the ECM that goes with that motor. If your interested,if not do u know somebody that is. I am parting out a whole car so if u know anybody that need parts let me know thanks.

I also have pics of the eng/trans if you want to see them give me a e-mail address.

I am nt interested in it but I will let my buddy know. How much are you selling it for.