what to do with my c-10

Where u shortened the front fender

No theres no gap just the usual 3/16'' gap between the fender and the door. I dont have any good pics.

Door it and chop it! But maybe leave a little rocker so it looks more complete. And dont overchop it and make it look unproportioned. just my two sense. The only way i talked myself into dooring my truck wuz if I chopped it too. And plus if your thinking about it now youll probably regret not doing it later. Good luck.

Originally posted by LowestSixty7



Alot of what you want to do depends on what size wheels you want to go with. Heres is the deal....with Matts truck we have 22's on the truck and its doored. But with having the 22's on the truck with 35 series tire we had to slightly raise the bedsides about 3/4''. If you go with 20'' wheels it will be alot better but its up to you. With the 67' front end its a little harder to lay becaue of the hood is. Easier on 69-72 trucks because of the hood and fender. Now on my 67' its doored, chopped, and sectioned with 20'' wheels with a 35 series tire and my tire still hits my the front fender well we built for it. I had to narrow my trac with in the front 5'' total. 2'' from the crossmember and 1.5'' each side on the upper and lower control arms. So in the end its all what you want to do and with what size wheels. I would love to have put 22'' on my truck but with it being sectioned and doored they would have been sticking trough my bed and front fendersI would post new pics of my truck but i am computer stupid....later

well i have 20's in the front with a 255/35 and 22s in the back with a 285/30...if i want to door it do think i would have a problem in the back, assuming the front would be alright?your truck is lookin good by the way

You will have a slight problem...like i said with matts truck doored with 22's and a 265/35 tire we had to raise the bed sides 3/4''.
http://matteye.ifcustom.com/matts dump/matts with 22s/mattswithrozzis5.jpg

Look at the Bed it has the sheetmetal over the wheels...doesnt really show all that well. later

doored with a 2-4" channel and roadster that bitch

Originally posted by LowestSixty7



You will have a slight problem...like i said with matts truck doored with 22's and a 265/35 tire we had to raise the bed sides 3/4''.

http://matteye.ifcustom.com/matts dump/matts with 22s/mattswithrozzis5.jpg

Look at the Bed it has the sheetmetal over the wheels...doesnt really show all that well. later



ya its lookin close, his tire is a little more than a 1/2" bigger than mine. i might just end up leaving a small amount of the rocker. does his actually lay door, or is there some clearance? i know the way the rocker is on these trucks its pretty easy to make the door lay, given a small enough tire. i might just have to keep the paint on the bottom of my door. thanks for the input man, if anyone knows c10s its IF, i appreciate it.

door it and frontend conversion would be nice

i have a great idea!!..i think u should just sell it to me!?!? haha naw man i say door it on 22s maybe with the 255/30/22 tire so maybe u dont have to mess with raising the bedside?