scion xb air ride???

wondering who all has put the kits on the xb's. any problems, advice, etc.possibly looking at the universal-air kit for someone. thanks

we used the fbi rear brackets for the rear and the universal kit for the front and it was super easy to install.

CHECK OUTWWW.RANDODE.COMWE'RE FEATURING HIS XB IN THE NEW DVD AND IT LAYS HARD. I'M SURE HE'LL HAVE ALL THE INFO YOU NEED.

I have a set of bolt in fronts from a customers car that I just want out of my shop...they get big lift, and ride not too bad.

we have used the AirLift kit a few times at the shop, lays good, with a decent ride.

I dont like the rear brackets the put the line on the bottom of the axle, you can make a bracket to fit a 2500 pound bag that has the fitting on top of the bag, and away from the road. You have to slightly offset the bag from the center of the upper mount but it can be done, and you have to use a short fitting, of the compression type. I built mine to be 100 percent bolt in too, and it tucked a decent amount of tire in the back.

Oh I ended up having to use bolt in camber plates in the rear, due to the tire hitting the front of the fender as the axle pulled forward, you can buy them online...let me find a supplier for you, they give you about 3 degrees of negative camber on the rear by bolting in between the axle and the hub.

thanks for the info.a buddy of mine has someone possibly wanting his box done. i'm looking for what to expect if he go's for it.

is it possible to lay the stock body kit on one of these with just bolt on stuff???

Maybe on a 16. but with 18's the tire will pull too forward in the rear, and hit the fender, and in the front you need to raise the strut tower.