Shocks on Uppers?

i dont run shocks on the front ...and i have no probelms just get slams no bouce

I took the shock off the passanger side and aired it down little by little. It's SUPER bouncy on that side.

I'd hate to drive it w/o shocks. I'm running 2500 'Stones so it might be different than Slams.

the brakes still work as if the factory did it themselves. the booster couldnt be moved over due to the intake manifold being to large. the truck was a daily and the owner wanted to keep it as stock feeling as possible. even the ABS was moved

this isn't my truck, but i did mine the same way and it doesn't affect turning.

That upper bag bracket has been severely compromised by that custom "clearance" solution.

With Slam bags, you will still get that no shock bounce if you aren't running them. I had mine off once, never again. Its very annoying.

As for triangulating the lowers and mounting the shocks to them, he wasn't talking about tube arms, just triangulating the stock lower arms to eliminate the strut rods.

Originally posted by TwistedMinis

As for triangulating the lowers and mounting the shocks to them, he wasn't talking about tube arms, just triangulating the stock lower arms to eliminate the strut rods.



yup, i learned from the master lol

i have also seen them on the sway bar

Originally posted by baggedwagon69



i have also seen them on the sway bar

do you mean strut bar?