Page 2 of 2
American Cars \ Questions on bagging a capriceQuestions on bagging a caprice
views 1928
replies 11
following 9
draggincaddy
+1y
Edited: 1/16/2008 11:32:54 AM by fiveinchbodydrop
Edited: 1/16/2008 11:31:07 AM by fiveinchbodydrop
we did a buddy of mine on a 26in tall tire. stock everything and it just misses the ground(out .5in) which he's happy with.
in the rear we took a 5in tube cut it in half and made a small c-notch. put axle perches on it and i welded a plate to the stock upper spring foot to bolt the bag to. if you cut a access panel in the back behind the seat you can get to the top of the bag this way.
the front is all stock with a cut pocket and notched tierodheres a couple pics
Edited: 1/16/2008 11:31:07 AM by fiveinchbodydrop
we did a buddy of mine on a 26in tall tire. stock everything and it just misses the ground(out .5in) which he's happy with.
in the rear we took a 5in tube cut it in half and made a small c-notch. put axle perches on it and i welded a plate to the stock upper spring foot to bolt the bag to. if you cut a access panel in the back behind the seat you can get to the top of the bag this way.
the front is all stock with a cut pocket and notched tierodheres a couple pics
baggedwagon69
+1y
to lay a 20 on the factory 4 link you need to ext the 4 link a bit or your wheel will be to far forward best thang is to do a custom 4 or 2 link in the back also you need to cut out for the drive shaft.on an18 i would thank you could lay it easy