looking for pix of 2 link on yota

ok i know im gonna get bashed..but im going with a 2 link on the yota..its an 83 and i am wondering how to build it.....

Edited: 1/13/2008 8:08:36 PM by lucky_brew

here is a whole thread on 2-links

http://www.streetsourcemag.com/forum/topic.aspx?topic_id=82825&Topic_title=2+Link+Pics&forum_id=13&forum_title=MiniTruckin+General

"NO CHIP DONT DO IT!!!" but you could look at any 2link from any truck and get the idea.

Edited: 1/13/2008 8:21:36 PM by lucky_brew

i think seth bomar (twisted minis) has a 2-link. i could be wrong, ill have to go look...

well no matter what everyone tells u a 2 link is good so dont let them talk to much shit

ive had it on a full size before and liked it...im not gonna be doin any side to side...i was just wondering how to do it on a yota...on my full size the front leaf perches were outside the frame.on a yota they are under it..

big long two links that mount outside the frame on a fullsize are one thing, but the bars cant be long enough on a mini, and the attachment point will be too low. You will probably end up dragging the two link instead of frame.

just make u some out of a piece of tubn and the bolt/ weldd ur link bar to it and hang ur front mount on the inside of ur frame and be sure to brace it good cause the inside of the frame is thinner than the outside, i suck at explaining cause i left some shit out. call it u need more help 912 281 4490 ... my name is eric

how do i connect it to the rear end b/c if i move it inside the frame the leaf perches wont work...could i modify a axel bag bracket and make it work?

Originally posted by lucky_brew



i think seth bomar (twisted minis) has a 2-link. i could be wrong, ill have to go look...

haha if he were violent he would probably beat you. He has a 5 link, a 2 link isnt even half enough for seth.