help shaving door handles.

Edited: 1/30/2008 4:50:13 PM by Ice

Originally posted by slammed x on air



Originally posted by AZ UNDERGROUND



rage gold is bondo just a little better there are so many prefrences but we use rage at our shop and it works fine ..

well rage and bondo are both body fillers there just brands. just incase he dont know dont want him to get confused



agree , both fillers... but i wouldnt use the BONDO brand to save my life... loltheres a big difference between using Bondo and other brands .. like Evercoat brands... we use Rage gold... due to the easy sanding and less pores and less shrinking if any ,and many other benifits.. compare to using BONDO brand , which shrinks easy, hard to sand and other stuff...

i put fiberglass resin in my rage gold just to make it creamier and smoother.usually dont need any kitty hair unless theres any pin holes in the welds. and a very skim coat will fix that. and bondo brands 'gold' bondo sux just as badas the regualar.

Originally posted by bagged85



i put fiberglass resin in my rage gold just to make it creamier and smoother.usually dont need any kitty hair unless theres any pin holes in the welds. and a very skim coat will fix that. and bondo brands 'gold' bondo sux just as badas the regualar.

Bondo (company) makes "Gold" brand now? or you talking Evercoat Rage Gold ?just wondering...

Originally posted by Ice



Originally posted by bagged85



i put fiberglass resin in my rage gold just to make it creamier and smoother.usually dont need any kitty hair unless theres any pin holes in the welds. and a very skim coat will fix that. and bondo brands 'gold' bondo sux just as badas the regualar.

Bondo (company) makes "Gold" brand now? or you talking Evercoat Rage Gold ?just wondering...

can i put resin in my bondo mixture and brush it on my door panels then sand smooth??

Probably would not want to brush filler on. Use a spreader.

Originally posted by mazdaonchrome



im gong to shave the handles on my 97 nissan.. ive already got fillers...my question is...do i trim up the fillers to fit in the handle hole or do i just let them over lap...if anyone had pics of shaving doorhandles on a nissan would help alot..thanks original rage gets less pinholes than rage gold, so i would go with that