threads
Page 2 of 3
Chevy/GMC Trucks \  Attn. 88-98 fullsize owners...

Attn. 88-98 fullsize owners...

Chevy/GMC Trucks Make Specific
views 350
replies 24
following 11
 
974door   +1y
Originally posted by Thebutchershop



i m usin stock uppers, and i notched my frame for the lower hose, it easy , i havent narrowed mine but a half inch on the uppers and lowers wouldnt hurt!

You're using stock uppers and lowers and doored on 24's....That's talent right there.
974door   +1y
bump
Thebutchershop   +1y
ya i got lucky it worked out , trust me it was luck no talent involved , im not goinna take credit for makin it work when it jus happened that way lol, i am layin doors on 24s and ive drug into my doors almost a half inch ive lost almost an inch off the bottom of my front bumper and it still lays flat on the ground , my tires come an inch or so above my hood, since that ive taken the 24s off and gone back to 22s , to much of a pain in the ass to turn and was eatin tires like a bitch , even tho it looked badass it wasnt fun to drive anymore and i drive it daily, it turned out to be a big pain in my ass and i belive if its to hard to drive then its a pointless modification, and yes they are stock uppers and lowers with minor modifications!!!!!!1
974door   +1y
I think I am just gonna put the rockers to the ground on this one and hold out for what I really want, a doored crew cab square body.
urdaddy   +1y
i have 3/4 uppers and they didnt have to be shortend..
974door   +1y
Originally posted by urdaddy



i have 3/4 uppers and they didnt have to be shortend..

What size and offset are your wheels and how close are they to the fenders?
Thebutchershop   +1y
im runnin 22s with a plus 15 offset when its layed its got plenty room to drive and turn minor corners , at full lift with he7 slams i get almost 2 inches of clearance with the 24s i get bout 3/4 inch cleance all the way up all at 200 psi and it locks out the front
Thebutchershop   +1y
im runnin 22s with a plus 15 offset when its layed its got plenty room to drive and turn minor corners , at full lift with he7 slams i get almost 2 inches of clearance with the 24s i get bout 3/4 inch cleance all the way up all at 200 psi and it locks out the front
CharlieB   +1y
I have air ride techonolgy strong arms upper and lowers on my 2 door
Thebutchershop   +1y
do they help you any better on clearance or lift? i ben lookin at those but dont no anybody runnin them?