Project: 20's up front finished page 3 (3/21/08)

Edited: 3/21/2008 5:44:11 PM by soccorjimmy

Edited: 3/8/2008 8:35:20 PM by soccorjimmy

Edited: 2/24/2008 1:37:52 PM by soccorjimmy

Edited: 2/20/2008 3:42:23 PM by soccorjimmy

Edited: 2/20/2008 3:39:15 PM by soccorjimmy

My buddy Ed is redoing my front to lay out on 20's. It was originally done to lay out on 18's but I finally grew up a little. JIMMY

Before:


The little trianlge piece was supposed to be steering stop but the shop before must not have realized that the piece was pushing my calipers in when I turned lock to lock, that piece is no more

some other before pics


bad bag geometry due to the fact that no radius relocators were installed plus the abag mount angles were off

Everything went bye bye

correctly done to start with the radius mounts

crappy welds IMO

out with the old

Updates as of 2/20/2007tie rad notch on pass side doneplenty of room to move around, also more room for the EDCfender wells cutnice camberpic of tie rod in notch thru the spokes of the rim, kinda a cool pic

Drivers side is being done as we speak.

The new work looks really professional. Nice work.

the new work def looks good

What kind of mods did you have to do to the front frame for the beams if any, thinking about running 20"s this summer but dont want to modify anything too much, im just gonna end up yota clipping it.

lookin good jimmy

nice work

hey jimmy can you take a pick of the radious arm relocator from under the truck. I have the same one as everyone elss but mine exhaust is right in the way.Thanks

total dick move on my part. the work looks really nice. I'm looking to do this to mine after the FF show.

here are the lower bag mounts. JIMMYlower bag o mounts started as a tube