Page 4 of 5
Under Construction \ Project: 20's up front finished page 3 (3/21/08)Project: 20's up front finished page 3 (3/21/08)
views 1552
replies 44
following 28
soccorjimmy
+1y
Edited: 3/21/2008 5:43:20 PM by soccorjimmy
aright i know its been a few days but there hasnt ben too much to take pics of...
i got the driver side upper bag mount done, had to relocate, and manipulate, the fuels lines, power steering line, and some electrical wires on that side to put the mount in place.
I put a quick round of black spray paint on everything to protect it from rust for a while until jimmy goes over everything with POR15
This is from Ed the guy who is doing the work:today i ran the first tubed stainless airline and will have the driver side done tomorrow.
last Al whipped up some badass panels to cover drivers side upper mounta little modifyingstainless airlines
aright i know its been a few days but there hasnt ben too much to take pics of...
i got the driver side upper bag mount done, had to relocate, and manipulate, the fuels lines, power steering line, and some electrical wires on that side to put the mount in place.
I put a quick round of black spray paint on everything to protect it from rust for a while until jimmy goes over everything with POR15
This is from Ed the guy who is doing the work:today i ran the first tubed stainless airline and will have the driver side done tomorrow.
last Al whipped up some badass panels to cover drivers side upper mounta little modifyingstainless airlines
lucky_brew
+1y
that shit is SOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO fukin clean!
soccorjimmy
+1y
Here are the pictures!!! Woohoo!! they include,the new radiator overflow & custom bracket!The custom bracket to support the cold air intake tube!new mounting braket and location of main fuse box!The driverside setup!Finished pictures of the truck aired out on the ground!!
radiator overflow.
driver side
driver side airline
brake line bulkhead DS
top of cold air bracket
cold air bracket
painted and installed
fuse bracket mounting it bolts into the the fender at 3 spots you can see it if you look close, used to be next to the master cylinder - now its in the front
radiator overflow.
driver side
driver side airline
brake line bulkhead DS
top of cold air bracket
cold air bracket
painted and installed
fuse bracket mounting it bolts into the the fender at 3 spots you can see it if you look close, used to be next to the master cylinder - now its in the front
soccorjimmy
+1y
What you all have been waiting for al's legs for some reference
the rear can go lower when jim moves some of the exhaust around
little camber shot
Just want to give alot of special thanks to the two guys who did this for meEd and AL, you guys frickin rock
the rear can go lower when jim moves some of the exhaust around
little camber shot
Just want to give alot of special thanks to the two guys who did this for meEd and AL, you guys frickin rock
lucky_brew
+1y
^ ^ ^ damn! that "kid" Ed does some amazing work to only be a teenager! (watch out seth. hahah! j/k) very impressive... and a super nice guy over the phone! looks great man - he was telling me about that intake and like he said, its definately worth being proud of!