tips.....for torsions

Man bump and grind you not take notes said it had a pair of nuts and a bitch to get off, cut that shit out.

lol fester. i took notes! and then found out for myself!

fucker just about killed my hand when the ratchet slipped!

hey homie dont forget to raise the truck off the ground to take the pressure off the torsion bars. I know it sounds dumb but people forget this step

yeah, have fun breaking the two nuts apart. i used a box wrench on the top one, with the long wrench trick and it still look alot of effort. i ended up cranking them down more later. i went til i had about an inch of threads above the nuts. i lowered mine sitting on ramps up front so i could check and keep tabs on where it was sitting. and i used a manual 3/8" rachet. use air. that sucks.

4 foot breaker bar did the trick.........that 130 psi couldnt. thanks guys.

come on...pics.