erikharbour
+1y
HYDROS,Compressors, Audio, Lighting, anything that needs power KINETIK can do it!
As fas as what product you need for different setups here is the best way to go about that:
HYDROS - use the same ammount that your setup would normally require ( yes you can use less or even smaller but why) this will give you longer play time and more impact to the pump!
Compressors - generally the Viair is about 40A each so this means they need 500W each add them up and that is your total wattage needed to support.
Audio - simple use the wattage rating of the amplifier you are using. If the amp is not one of quality use the fuses on the amps and put them into this equation A x 12.5 = W this will tell you the total wattage that amp should be able to make. then again add them all up and you know the total you need to support.
Vehicle - DONT FORGET THE TRUCK! many times people will replace the factory with a new cell or battery because they are adding audio etc but then they dont even think about the vehicle. The vehicle is designed to work based on its factory alternator and battery alone it cannot make any more power than that. So how do you find out what you truck needs to function. Simple use this equation again Amperage of your alternator x 12.5 = wattage
Now the end result add up the vehicle, the compressors and the amplifier wattage take that total and this is what you need to support.
How do you know what KINETIK product you need ? Easy! the model numbers = Wattage for example the HC1400 is a 1400W model so if you add it all up and the total is lets say 2000W you will need 1 Hc1400 and 1 Hc600 and you are totally supported!!
Sorry to write a book but i figured the knowledge would be helpful!!