**New Pics** Taco on 20's w/out spindles

Originally posted by tacokane



I have a set of spindle spacers I designed that will allow you to flip your tie rod end to the bottom to eliminate the toe in problem, and comes with all new hardware and lower ball joints. Hit me up if your interested.

any pics of said products???? hard to sell something noone can see

Yeah I'll have all the pics soon. Just trying to be carefull until the patent goes through.

Bobby is the man!!

Edited: 8/14/2008 2:40:59 PM by lost cause

Originally posted by sadisticiron



pm me your email and i send u a few pics

Thanks bobby, I finnaly got your pics (they were in a spam folder lol)

Did you raise the rack and pinion in those pics?....I've already cut and replated that crossmember........

Other then that, you just made the spacers out of dom tubing or what? and did you use the factory balljoints?

Also,.. did you have to Z the frame

Thanks again for all your help

his spacers were made from 1" cold rolled solid that is machined out to fit a 12mm bolt.

Edited: 8/14/2008 3:35:49 PM by sadisticiron

yes 1" cold rolled solid that is machined out to fit a 12mm bolt. and the rack was moved 1 inch up along with the crossmember then replated. and no the frame isnt z'ed because the crossmember and rack were moved. and factory ball joints. make sure you put strut rod were it is in the pic cuz it wont lay with it on to of the lca. after the truck was done the upper ball joint was put back into the upper arm like stock

I don't have spacers and it lays 20's all the way around.

im also curious of what yall r talking about, i know thr artical and im am also trying to fix problems with my 99 taco concerning the front tires, mainly the bump steer and toe. can you post the pics or email me jdozier1279@yahoo.com

Edited: 8/14/2008 5:51:27 PM by lost cause

Originally posted by DragginTaco



I don't have spacers and it lays 20's all the way around.



^^^^Really?.....can you post pics of your setup Rodi?

Originally posted by sadisticiron



Edited: 8/14/2008 3:35:49 PM by sadisticiron

make sure you put strut rod were it is in the pic cuz it wont lay with it on to of the lca.

What exactly did you do with the strut rod? I thought in the pic it looked like you just relocated it to the bottom of the LCA, but if I do that the bolt holes wont line up at all??

^^^Right now thats the only thing stopping me from laying out, I've got the front suspension torn all apart and ready to be put back together,..... but I cant figure what to do about this strut rod issue?

Thanks for all your help