ford ranger bodydrop ?

Need help! I bodydroped my 94 ranger 3 and 1/4 inches and the steering nuckle is at such a angle it wont turn its gets binded up.Is this a common problem...thanks

you might want to check www.borgeson.com and see if you can come up with a creative solution.

i just did a 94 ranger, i swapped to a 98 front clip...i sectioned the steering column 13", pushed a brass bushing in the end, used a flaming river u-joint, some dd rod, and a firewall mounted support bearing. works fine. same thing should work for you. let me know if i can help.

Edited: 9/28/2008 1:49:05 PM by zeroPSIzeroHP

Rick, had the same problem in my 90 ranger. Used a steering U-joint out of an 80's F-150.

yup u have to redo the steering shaft, it just doenst magically work.

No reason to spend big bucks on Borgeson or flaming river stuff when you can get joints in town cheaper.

i used ones off of an f150 on mine.

Thanks guys I will see what I can come up with