chevy 1500 on 24's

i was wondering what you are using for control arms,drop spindles. i need to get them just trying to figure out which are the best to use. any help would be great

whats up man i have a silverado on 6s i bought aftermarket control arms and belltech drop spindles but you can do it without drop spindals call Aaron Iha he will help you out and get you the parts you need to lay on 24s without hardly any neg camber his number is 626 967 0045

yea he wants 2200 for arms alone...

anyone i know there are pleanty of u out there

potter has a 06 or 07 crew cab swb thats channeled on 24s and last i knew hes rolling stock uppers and lowers but had ekstensive make him a new set of uppers and lowers

extensives are like 12 to 1500 but idk how there camber is when they get done if you look at all aaron trucks he builds they have hardly any neg camber problems but its your money extensive does really good work too and they will help you with any problems you have

call choppin block (559 275 2901) there arms are only like 700 u actually just need the uppers to lay a 24 but if u just get the uppers u will get a lot of negative camber laid out

potters i think were narrowed so he can ride low and turn

Edited: 10/30/2008 11:53:19 AM by Jcfreeman0

i have stock lowers recessed in 1" on the stock bracket, and custom built uppers that are 1" shorter than stock. Not much negative camber. I can turn quite a bit before it hits. Just barely enough lift to clear my 24x10 275/30r24 tires

ya i need them for a 96 chevy...