99' Frontier on 22's...
low f350
+1y
Originally posted by 974door
What kind of mods need to be done to the stock arms to lay 22's?
Upper ball joints have to be re-angled so they dont bind. The lowers have to be triangulated and the strut rods removed. Some notching of the lowers may be needed by the frame to lay out.
What kind of mods need to be done to the stock arms to lay 22's?
Upper ball joints have to be re-angled so they dont bind. The lowers have to be triangulated and the strut rods removed. Some notching of the lowers may be needed by the frame to lay out.
974door
+1y
Cool, thanks for the info.
guiltybydesign
+1y
whatever you do dont door one on 20s.... and def do the 5 lug swap.
HarryBalls
+1y
your deff gonna need drop spindles. Also deck the frame for lca clearance. And ditto on pie-cutting the uppers.
HarryBalls
+1y
the strut rods can be retained if you want. just have to notch the driver side and gusset the bottom cuz it hits the steering pump.
974door
+1y
Cool, thanks for the info. Starting on it this weekend.
tuckinlugs06
+1y
there was on one 20's doored getten done but not sure what happened to it