yota tear down! my v8 swap progress

--------------------------------------------- Originally posted by bigbckwndo --------------------------------------------- Originally posted by frankie1 well ive been told the stock pump will work but i will have to put a presure reducer in the line. then ive been told i can hook a electric inline fuel pump and it will pull threw the stock fuel pump. id like to find some one who has already tried and figured it out. i plan on using my stock tank and reducing the preasure on mine but it will be a while befor e it gets that far. --------------------------------------------- i am using the stock fuel pump on the motor and just drilling a whole in the bottom of my stock tank and run a line --------------------------------------------- what i did on mine was hook all the lines up to the stock sending unit, but i took the pump out of the sending unit and just ran a line to the bottom of the tank, that way i didnt have to ruin the tank.

any more progress pics of the swap...im in the middle of mine

comeon i know there has to be some progress ....also joey where is your build thread..id like to see more of your build swap...what did both of u use for a fuel pump...my plan is to run a line in the tank in place of the furl pump and run the mac pump on the motor...and also joey i see u are using your stock radi ...does it over heat..mine will be driven alot

i will post some up soon. i havent worked on it too much but right after west coast nats im gonna start smashin on it hard. i just want the heat to stop. its like 110 over here so thats whats been stoppin me. also im not under a stock hood and im just gonna use the sender from the 22r yotas for fuel and not cut the hole on the bottom.  i think it should work ok. ill get pics as soon as i can

update pics comin soon been bustin ass on it and will post pics soon