question about hooking up blinkers with led's..help please

Edited: 12/29/2008 12:45:28 PM by lowazzmaz

ok im doing this on my yota also I went to autozone and got a trailer light converter from 3 to 2 it was like 14 bucks now for the parking lights just run that wire through the coil side of the relay and run that to the light then the brake and turn run directly to the light. The relay will slightly dim the parking light and the brake and turn will have full power and be brighter. This is what I am doing to mine. I also did not want to pay the rip off price from FBI for a TEC module. here is the link to the module http://www.shop.com/Hoppy_Electronic_Taillight_Converter_48_-17012026-p!.shtml

how many ohm of a resistor do i need... i have some and it may be the best quickest fix if i got the right ones

you should use a no load flasher with leds because the regular flasher will do just what it is doing blink fast. Most companys that sell the leds should have the no load flashers.

actually.. i thought mine would just blink fast... theyre not, they are just buzzing in the relay. the blinker light comes on and stays on, then the relay under the dash buzzes saying theres no bulb