threads
Page 2 of 2
Ask A Pro \  Shorten HalfShafts / Custom Half Shafts?

Shorten HalfShafts / Custom Half Shafts?

Ask A Pro Q & A
views 5430
replies 11
following 8
 
bodied b2600zx (josh)   +1y
Edited: 5/14/2009 2:19:33 PM by FLGatorsrule

I have the old style 300zx IRS and I threw a couple of my wheels on it jus to check it out and it had insane camber. .   looked to be the same as the front of my Mazda. .   And I'm gettin 12 degrees camber up front. .  I'd like a good bit of camber but I don't really want that much! ! !  I'm gonna be gettin the sub frame that it mounts to and I gotta play with the height of it. .   I'm gona do what you said, Max, and mount it so that the third member is at the middle of the wheel at half travel. .  And see what kind of camber I get with that. . .      -Josh
maz duh   +1y

The stock 300 zx will also toe badly due to its single trailing arm design.  I'm working on one right now where we are changing it to a knuckle with upper and lower control arms. Special  thanx to Max for his design tips on building an IRS setup, I've leared a ton from him on the subject.