do i havvve to?

you have the trans member to deal with the front engine member ...when i got mine thats what kept it from laying ...trans member is the easyest but still only solve half the prob..

Wait till you get the money! It ain't even worth it if you don't "Z" it and build a new tranny x-member. You'll kick yourself in the ass everytime you air it out and look at it!!!

i was going to say.............. if you have to Z a truck......it dont matter if your laying 15" wheels or 100" wheels, u still have to z it! so just do it!

alright i got ya thanks guys i will keep saving my doe! haha thanks again

Edited: 8/31/2009 5:49:11 PM by bigbckwndo

Edited: 8/31/2009 4:34:39 PM by bigbckwndoh8r right under me! haha!

---------------------------------------------Originally posted by bigbckwndojust save you mulah and z it. its not worth the headache. the time you spend trimming the crossmember or messin with it you could z the frame and be done and done!!---------------------------------------------+youve never crawled under a toyota. jeremey up there told you what to do.. it has to have a new crossmember made or buy one thats premade. it hangs 2 inches below the frame rails. i made mine. and i did NOT  z the frame and its body dropped and lays out with a 18 inch wheel. yoyu will need a spindal for it. i nothched the lower controls but the ball joints make it bottom out.  i did notch the firewall a inch back not much at all but mines body dropped.  i have pics to prove this if you want them emailed or just look at my myspace theres pics there  out bobby

Edited: 8/30/2009 1:01:23 AM by sadisticiron

you do not have to z any toyota truck except the new body style tacomas. you only have to section the lower control arm mounts an inch. an build a new cross member for the front. redoing the cross member for the tranny is a must. you can run up to a 20 with all stock suspension including stock spindles. if you want to know how pm me and ill give the low down. it takes about 15 mins to do. z-ing the frame will take a full weekend to do it RIGHT then you have to drop the motor......ya a lot easier

Edited: 8/31/2009 5:47:43 PM by bigbckwndo

Edited: 8/31/2009 4:36:38 PM by bigbckwndo---------------------------------------------Originally posted by sicsan---------------------------------------------Originally posted by bigbckwndojust save you mulah and z it. its not worth the headache. the time you spend trimming the crossmember or messin with it you could z the frame and be done and done!!---------------------------------------------+youve never crawled under a toyota. jeremey up there told you what to do.. it has to have a new crossmember made or buy one thats premade. it hangs 2 inches below the frame rails. i made mine. and i did NOT  z the frame and its body dropped and lays out with a 18 inch wheel. yoyu will need a spindal for it. i nothched the lower controls but the ball joints make it bottom out.  i did notch the firewall a inch back not much at all but mines body dropped.  i have pics to prove this if you want them emailed or just look at my myspace theres pics there  out bobby---------------------------------------------haha jeremy!! haha! please TOOL! ! look at my build and shut your mouth faggot! its called learnin. i havent seen jeremy in a year! so shut your mouth bitty boo and fix your face 

and god damn your yota is sick!!! haha! TOOL

Are you guys talking about me? I scrolled back to the beginning and I am the only Jeremy that posted (whos name is showing). Am I involved in some mess I don't even know about?