rizz0
+1y
front brakes are wilwood calipers, speedway rotors, and all bracketry by john yoakum (thanks again john your the man) the rear brakes are the same except the bracket are modified brackets made for a 3 inch tube axle......the front has been z'd i guess while the frame was being built cause the front crossmember lays flat as does the entire frame the front has also been narrowed 2 inches per side so it can turn while laid out and trust me he never ever has it higher than 2 inches off the ground at any point in time!!!!!!!!!!!!! he will leave his house cruise it around and not touch a switch til he gets back.....and yes it was a 4x4 when it came to my shop he brought this and an excab 2wd and this is the result....