Michigan Metal Works ---- Updates : Please Read.

thanks, cant wait for them to arrive so i can get them installed

Here is the spindles finished with the steering arm attached.





Taylor

So on these spindles do they offer more drop or any benifits over traditional drop spindles or just look really sexy?

These ones inperticular, are stock replica, made to accept a bigger brake kit. Customer has a full custom frame and suspension, but stock spindles, so we changed that.

they can be made in any way you like, they are hand made so crazy hub swaps and brake swaps are fair game.



Taylor

i ment more along the lines of having more drop but not push the wheel out.. for instance... im building a 2004 4dr frontier and using my extended cab frame.. im tempted to use a yota clip cuz the nissan stuff has such bad camber...3.5 inch drop spindle i think would help a ton.... just dont know is some thing like that is possible of it smarter to just raise the uppers like dodge or nbs chevy for instance and run a 2 inch spindle.... what is your thoughts on something like that... i would like to run a 245\30\22...

Sorry, i just realised there another reply by you jay. shoot me an email if your still interested in this, info@michiganmetalworks.com


Sorry, i normally reply asap, didnt see this at all :(

Just a quickie update. Been very very very busy in the shop. I was down for a while due to some kidney issues, but im back up and running at about half speed at the moment, but still pumping orders out and putting in hours behind the welding mask.

Heres a few cool parts that have left the shop lately.

The FSC spindles got powder coated and shipped to the owner. They turned out to be a great addition to his truck:



Did some baby blue metallic pearl Dually arms for the 3/4 ton hub conversion. I ended up loving this color. These going on a truck to lay on some big ass 24" dually wheels with a 305-35-24! Included the Jeebus Joints and shock mounts on the arms as well, for a complete package! I was looking at our records and we have done over 100 sets of these dually arms so far, and have gotten great reviews, looking forward to selling more and introducing the tubular version in a couple weeks also.

Designed and produced a new set of arms a few weeks ago as well. 04-08 F150 trucks are no covered by our product line also. These arms can lay on 24s, and include lower bag mounts, and shock mounts. They are here with Jeebus Joints, and limeish timeish powder coat.

Finally got a little play time on my own truck as well. built these arms for it, to lay on a 305-35-24 with less than 2 degrees camber change during its entire suspension cycle:

Been doing ranger arms like crazy lately. Averaging something like 3 sets a week. Guess they like them!

Did a few cool custom sets of s10 arms. These for the customer have the Freaks logo in them:



Then just the typical hours of time behind the welding mask:

You are a mad man. just pumping out the orders left and right. Cool stuff bro!

What do you offer for notches? 89 mazda on 20's.

Looks great Taylor, I can't wait to get on this 83 and work with these torsion bar arms you made for me.

I really envy how nice your stuff looks Taylor. Keep up the good work. I had I guy ask me about some ranger arms a couple days ago. I sent him your way.