threads
Page 46 of 132
Mini Truckin General \  Michigan Metal Works ---- Updates : Please Read.

Michigan Metal Works ---- Updates : Please Read.

Mini Truckin General General Discussions
views 56235
replies 1319
following 232
 
tlw32882   +1y
SD, aim, dallas hotrod parts, ride tech, kp componets. thats all I can think of. if the price is for uppers and lowers then that is like 50-65ish% less than what everybody else is selling them at. Plus there is nobody that I no of that sells arms with jeebus joints. SD had mentioned on C10 forum that they were thinking about making flat plates for c10s. there was a few guys asking about them when they released the s10 flat plates.
jeebus @ mmw   +1y
No, that price i posted above will be for uppers only. I couldnt make that work for uppers and lowers, i have more than that into the jeebus joints alone.


ill see what i can do.


Taylor
tlw32882   +1y
SD sells there uppers for $449. Is the top ball joint the one that usually locks up first. Is there going to be a benefit running a jeebus joint on the uppers only?
OutkastWagon51   +1y
Hey im between comps right now so a phone call would work best for me to discuss some parts with you. Is that cool? If so what's the best times to call. Look forward to discussing some things with you and hope to use your parts on my project.
jeebus @ mmw   +1y
--------------------------------------------

DragaDodge said:

SD sells there uppers for $449. Is the top ball joint the one that usually locks up first. Is there going to be a benefit running a jeebus joint on the uppers only?

--------------------------------------------



Yea, the stock upper binds first because of the terrible angle its at. So, a set of custom uppers with the correct angle will help lay out on a larger wheel.. how large, im not sure yet.

The Jeebus joints get 16 more degres of travel that a stock C-10 balljoint, so it will help alot on drop and lift as well. Ill probably sell the Jeebus Joint uppers, with x-shafts and powdercoating in any color for 449$ i believe SD offers powdercoat at an extra 50$, so theres with balljoints for 449$ and 500$ with powdercoat, i should be able to stay under that by 50$ with free powdercoating.



Im not sure on the lowers, there alot of work, but nobody really wants to pay for it usually. I would guess ill have 550$ on those in the long run, with powderocating.

Taylor
jeebus @ mmw   +1y
--------------------------------------------

OutkastWagon51 said:

Hey im between comps right now so a phone call would work best for me to discuss some parts with you. Is that cool? If so what's the best times to call. Look forward to discussing some things with you and hope to use your parts on my project.

--------------------------------------------

No problem, give me a call whenever you have a free moment. I can take your call today (sunday) if you would like as well

989-750-2689

Taylor
2001x   +1y
make a set up taylor and send them down...mine will be set up for 24's with a 30 series tire
yellowhemi22   +1y
Hey Taylor i order some parts for a 05 ram a couple weeks ago.How the progress coming thanks Kevin
jeebus @ mmw   +1y
Hey kevin, there all coming good. There may be some pics of the arms later this week... :)

Here is a set of Isuzu Pup Arms. Jeebus Joint uppers, custom machined to a toyota taper for the customer, and a toyota lower. Narrowed on each side, to help just enough with clearing some bigger wheels! For some reason, i forgot pics with the upper x-shafts, but ill get those up later.

these to date are my favorite looking lowers ever, i love all the bends and flowing curves. Try to make that arm look like that from tubing! good luck!

post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
yellowhemi22   +1y
I cant wait to see those arms.And all the other parts as well.You do good work