threads
Page 49 of 132
Mini Truckin General \  Michigan Metal Works ---- Updates : Please Read.

Michigan Metal Works ---- Updates : Please Read.

Mini Truckin General General Discussions
views 56240
replies 1319
following 232
 
jeebus @ mmw   +1y
--------------------------------------------

FireCrotch said:

when ya going to offer flat plate yota arms?

--------------------------------------------

I allready do!

I make uppers in a few ways. The first way uses stock x-shafts and comes with screw in style balljoints, and come with everything else, including all polys and sleves and what not. They run 199$ Then, i also make them with custom x-shafts and jeebus joints, they run 449$

Lowers come two ways as well. Flat plate, with screw in lower balljoint, and triangulation arm, 399$ or with jeebus joints for 499$



Taylor
Rob Clayhill   +1y
how much will another dozen or so of those washers cost me? 2"O.D X 1/4" X 9/16's hole
yellowhemi22   +1y
Any pics yet Taylor?
jeebus @ mmw   +1y
Rob, those washers are just a few bucks each, plus some shipping. Email me if you need some more, im doing a .250 plate cut coon.

Kevin, i was gonna post some pics up here in the next few days. I sent a box out to you last night, it has some of your bracketry and other stuff in it, just some of the .250 plate stuff. I have phone pics of your arms, but my phone takes pooey pics, so i was gonna clean them up and take some new ones with my other camera, and post some pics soon.

Ill get them up asap for ya!


Taylor
jeebus @ mmw   +1y
bump
jeebus @ mmw   +1y
Kevin, heres a few pics for ya. Ill have more over the weekend.

Ill also have some big updates on parts. Got a 07-10 Chevy Truck Arm Kit, Steering Kit and Bracket Kit. Few new parts for dakotas and C-10 trucks, and some new machined x-shafts that will come standard on arm kits.

post photo
post photo
post photo
post photo
post photo
post photo
post photo
yellowhemi22   +1y
Thanks, looking good
Drag23onu   +1y
whats that 07-10 chevy kit looking like?
jeebus @ mmw   +1y
--------------------------------------------

Drag23onu said:

whats that 07-10 chevy kit looking like?

--------------------------------------------

its looking DONE haha. Crated it up and got it shipped back to you guys.

The 07-10 Chevy arms i make are narrowed .750 on each side right off the bat, the uppers have jeebus joints with machined tapered shafts. the uppers also have a drilled and taped hole to mount the stock brake line to the control arm as well, so you arent throwing zip ties around your brand new control arms to hold your brake lines. The lowers have jeebus joints with machined tapered sleeves to install into the spindle.

The customer that had ordered the kit from me was going to be using the choppin block front spindles and bracket kit, so i made the arms fit within those parameters. I have a 08 Silverado that im going to be bagging later this winter, and i plan to produce a front kit for that truck as well, that would include a steering kit, uca bracket kit and bag bracket kit, upper and lower arms and shock mounts.

I will be using the basic layout of the arms i made here, with some slight changes to make it fit into my own kit a bit more unique and easier to layout. right off the bat, the Jeebus joints that i use for the uppers and lowers, get roughly 14 degres more travel than their ball joint equivilant, so they will be able to lay out on a huge wheel and tire setup.

Heres the arm pics:



post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
post photo
Drag23onu   +1y
umm O FUCK YA!! haha great work bro. we will be sending pics of the install we go. looks great man