threads
Page 2 of 2
Air Ride Suspensions \  EDC on a Front wheel drive?

EDC on a Front wheel drive?

Air Ride Suspensions Q & A
views 683
replies 19
following 7
 
garagebuilt   +1y

ok so you just put the zerk fitting in the plug that goes in the side? how often does it need grease?
Marcos_65   +1y
From what Vince at the Choppin Block said, fill it up once a month with hi-temp grease.  Maybe more if you drive a lot.
gravity5   +1y

My sanded was oiled, they came on early 80's chryslers and I made mine for my truck for 30. worked great, puped tonnes of air.  Just make sure to get one with a plug on the side fo the body, those are the r12 ones which are self oild.  The r143a ones are not.
garagebuilt   +1y

ok i found one on ebay. does anyone know if a sanded can be turned either way and work the same?
garagebuilt   +1y

can anyone tell me if the sd508 can be turned either way like a york, or if the can only go one way?
garagebuilt   +1y


Here is what sanden said when i asked if it could turn either way It depends how old the compressor is. 5+ years ago we off-set the angle ofthe fix gear key to reduce gear lash of .xxx mm Now if you run backwardsits a little noisy it will work fine and cool just some added noise.Many customers do it anyway    
Marcos_65   +1y
Nice, good information
tuckinlugs06   +1y

do they come with v belts...i have a york but these are smaller ...what one is better a york or a sanden
Marcos_65   +1y
York puts out more volume sanden can go up more pressure.
daddyjames843   +1y


 THIS IS THE STOCK ONE 4 MY TRUCK WILL IT WORK? AND WHAT KIND IS IT AND IF IT WILL WORK OW SHOULD I OIL IT?
post photo