Page 2 of 6
Build-Ups \ Slammy - Ranger BuildSlammy - Ranger Build
views 2030
replies 50
following 35
Slammy
+1y
--------------------------------------------- Originally posted by BigPerm pretty cool... if you're into that sorta stuff... j/k sammy! glad to see you on yet another forum. --------------------------------------------- well we both know you swing that way! lol haha
ahab
+1y
The plate work looks sick. It looks like you acually have a plan of what you are doing. Where are you getting the washers with the countersink for those allen head bolts?
The plate work looks sick. It looks like you acually have a plan of what you are doing. Where are you getting the washers with the countersink for those allen head bolts?
Slammy
+1y
Edited: 6/10/2010 10:58:59 PM by Slammy
Edited: 6/10/2010 10:58:37 PM by SlammyWell we are finally finishing up my end of this project. Has a date this weekend to get painted and then its back to the owners house for final assembly. I didnt get as many pics as i wanted as i didnt get to do a last mockup for assembled pics but ill show a few things. Some parts are still on backorder but nothing special pic wise.
Heres the vent mount and fuel line clamps i had made. Vent mount is so big cause it covers up where the three welded on bungs where. We wanted to get rid of them since we werent using themHeres the fuel line bulkheads going thru the 4 link mounts and those clamps installed. On the other side its the same thing but the stainless lines are for the air tank. Heres the rear bulkheads mounted on a tab that go to the fuel cell and air tank on the other side.And heres where the lines go to the pump itselfHeres how the compressors are mounted, another one on the other side of the tank.This is just the ebrake tab and finally here it is stripped down after i cleaned everything up getting ready for paint this weekend.
Edited: 6/10/2010 10:58:37 PM by SlammyWell we are finally finishing up my end of this project. Has a date this weekend to get painted and then its back to the owners house for final assembly. I didnt get as many pics as i wanted as i didnt get to do a last mockup for assembled pics but ill show a few things. Some parts are still on backorder but nothing special pic wise.
Heres the vent mount and fuel line clamps i had made. Vent mount is so big cause it covers up where the three welded on bungs where. We wanted to get rid of them since we werent using themHeres the fuel line bulkheads going thru the 4 link mounts and those clamps installed. On the other side its the same thing but the stainless lines are for the air tank. Heres the rear bulkheads mounted on a tab that go to the fuel cell and air tank on the other side.And heres where the lines go to the pump itselfHeres how the compressors are mounted, another one on the other side of the tank.This is just the ebrake tab and finally here it is stripped down after i cleaned everything up getting ready for paint this weekend.