Slappy Mc Nasty
+1y
the flywheel was next to new and the clutch plate was new, as well as the pressure plate.
*
the tranny bellhousing was scrubbed and cleaned with brake cleaner, then scrubbed again, dried well before installing anything. rear main seal was brand new (well see after tearing into it). the slave was new (less than 6 months old). havnt drove it to check the heat possibility yet.
*
it does seem like imma be tearing the tranny back apart and replacing the clutch disk, bearing and pressure plate. should be under warranty but just in case, imma wait until payday. THANKS FOR THE INPUT!!!!!