Back
To Page - Minitruckin' Magazine
Page 46 of 51
Minitruckin' Magazine \ project: toyroverproject: toyrover
views 31446
replies 507
following 246
FXDGRND
+1y
--------------------------------------------
crochface said:
--------------------------------------------
Great Pic from Surface.
crochface said:
--------------------------------------------
Great Pic from Surface.
nc dragger
+1y
--------------------------------------------
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
the winshields in 84-88 are a glued in windshield and trim installed over it. when i checked i was told the 89 and up rubber trim wouldnt work on say my 87. and then i see this sleek look on andys 88 and wonder if someonefeed me a line of crap. i would have much rather did the rubber trim then hunt for the some chrome pcs that are toughto find in good shape.
Great looking truck andy :BOWDOWN:
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
the winshields in 84-88 are a glued in windshield and trim installed over it. when i checked i was told the 89 and up rubber trim wouldnt work on say my 87. and then i see this sleek look on andys 88 and wonder if someonefeed me a line of crap. i would have much rather did the rubber trim then hunt for the some chrome pcs that are toughto find in good shape.
Great looking truck andy :BOWDOWN:
ahab
+1y
Big thanks to Air Zennith. The truck now has color matched compressors that pump almost three times faster than the old ones.
getto
+1y
--------------------------------------------
twisted yota said:
--------------------------------------------
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
the winshields in 84-88 are a glued in windshield and trim installed over it. when i checked i was told the 89 and up rubber trim wouldnt work on say my 87. and then i see this sleek look on andys 88 and wonder if someonefeed me a line of crap. i would have much rather did the rubber trim then hunt for the some chrome pcs that are toughto find in good shape.
Great looking truck andy :BOWDOWN:
--------------------------------------------ive actually said this befoire on here just not this truk...you can use a universal moulding..i recomend a "t109" or 23mm moulding wraps the whole shield and glues in..i am an autoglass tech/manager by trade so whomever told u that wasnt feeding u shit..i have converted many of these truks over from the chrome/black clip down stock mouldings..any decent guy shouldnt even charge u extra for it providing you are getting a new shield installed by them.
twisted yota said:
--------------------------------------------
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
the winshields in 84-88 are a glued in windshield and trim installed over it. when i checked i was told the 89 and up rubber trim wouldnt work on say my 87. and then i see this sleek look on andys 88 and wonder if someonefeed me a line of crap. i would have much rather did the rubber trim then hunt for the some chrome pcs that are toughto find in good shape.
Great looking truck andy :BOWDOWN:
--------------------------------------------ive actually said this befoire on here just not this truk...you can use a universal moulding..i recomend a "t109" or 23mm moulding wraps the whole shield and glues in..i am an autoglass tech/manager by trade so whomever told u that wasnt feeding u shit..i have converted many of these truks over from the chrome/black clip down stock mouldings..any decent guy shouldnt even charge u extra for it providing you are getting a new shield installed by them.
getto
+1y
--------------------------------------------
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
YOU SIR ARE WRONG.... the REAR window is a gasket and the front window "FW 598" to be exact, is a glue in.
Severed701 said:
truck looks amazing bro! and to the people asking about the windshield..i know for sure that the base model 89-95 toys used a gasket type molding which just just black rubber...i would assume they did the same in older ones also..not sure if this is something that is still availabe..but last time i did on in my 89 i got the molding from the glass shop...plus side to getting one for the specific truck is that its one piece and a gasket type so its easy to install/remove
--------------------------------------------
YOU SIR ARE WRONG.... the REAR window is a gasket and the front window "FW 598" to be exact, is a glue in.