SQUAREBODY FRONT BAG ????

I have a 1984 chevrolet crew cab. I have most of my bag stuff for the front. Slam re7, 3" spindals, cups and plates from lockone(Thanks). I have read through all the post just need to get a few things straight. Do I need to sink the lower cups in the lower a arms? If so how much? If I run 3/4 ton arms how far will it move the wheels in ? Can I run the rest of the 1 ton stuff?(brakes, hubs, etc?) Willl I need to notch for the tie rods? Will I have to modify the steering shaft? I am planning on body drop it so if there any other things I should know please let me know. I won't have to z the frame from what iI have read. Right? (Traditional body drop) Thanks

use the search.

Thanks for answering my questions.

no problem anytime

I have to z my frame

Why?

becaus the front of the frame does not lay, the Arms are on the ground along with the k member, and the frame is about 1 to 3/4 of an inch from laying

hard to tell in this pic because the road is sloping down, but the back of the body is lower to the ground than the front.

for the orginal question, see if thses pics can help. I have RE8's in the front though

That's odd.

I thought C30's lay'd with no issues.