Please help

Im building a 94 chevy crecab that im in the process of bagging . Right now its stripped down to the frame and i already notched the back and trimmed everything that comes in contact with the control arms and the front wont lay out . It still needs about an inch and a half. im running 235/70/16 . Did anybody else have this problem?

you might have to run a drop spindle..

Yep what he said^^^^^^

tie rods hiting the frame? and ya spindles

spindals spindals

sorry guys i forgot . I do have 3 inch drop spindals. it kinda looks like the balljoints are maxed out . i didnt notch the frame for the tierods yet I still have like 1/2 in. before they hit the frame.

wird it should lay hard you got your cups cut down take all the bags out of the frount and lay that bitch out see what hiting binding i have a 255 75 1 on the frount of mine and it lays hard

I didnt put the cups in yet . i wanted to make sure it it layed out first. i dont have a motor on the frame right now but even if we jump on the frame it wont go all the way down

sounds like where the control arm bolts to th ebottom of the frame needs to be nothced out, cause i have drop spindels and 225/60/16 and i lay hard when i hit the ground i still have air in the bags...

^^^^^^ me too