Page 7 of 14
Dually Projects \ 84 CHEVY CREW CAB DUALLY PROJECT84 CHEVY CREW CAB DUALLY PROJECT
views 34480
replies 137
following 22
evilbill
+1y
thanks! ...no they came with the truck and had bag plates that were all hacked up , so i cut all that crap off and started over . im not sure who made them or what company they seem heavy duty tho..
thanks! ...no they came with the truck and had bag plates that were all hacked up , so i cut all that crap off and started over . im not sure who made them or what company they seem heavy duty tho..
bigbeardedbastard
+1y
ah ok i was wondering.....i think i am just gonna cut my stock one and sink a wide pocket into them. yours looks good though!
evilbill
+1y
more front end work tonite .... sandblasted my driver side lower control arm
had to machine more metal out of the upper bag plate so the fittings will clear
this is the fitting setup i am using its a 45 and then a 90 on top i had to do this to get my leader hose in the right spot where it comes through the crossmember
bolted in for good this time
painted! hopefully get this bolted up tmrw!
had to machine more metal out of the upper bag plate so the fittings will clear
this is the fitting setup i am using its a 45 and then a 90 on top i had to do this to get my leader hose in the right spot where it comes through the crossmember
bolted in for good this time
painted! hopefully get this bolted up tmrw!
evilbill
+1y
got the driver side together tonight .. this is a pic of it with the bag compressed close to full drop
evilbill
+1y
ok got alot done tonight... front bags and brakes are finished
got my new shocks mounted up made aluminum spacers so they travel correct
some pics of putting the powertrain back in the beast!
://i126.photobucket.com/albums/p87/jbelain/DSC04041_zpsdeca4994.://i126.photobucket.com/albums/p87/jbelain/DSC04043_zps459fc102.jpg
finally got her bolted in for the last time had a bitch of a time gettin it all in with the trans on the back....had to remove the pass motor mount and then bolt it up when the motor was in place...
://i126.photobucket.com/albums/p87/jbelain/DSC04047_zps8d68931b.jpg
had some help ....from my buddy ....wiser...
she is pretty tight around the firewall but she fits...
://i126.photobucket.com/albums/p87/jbelain/DSC04052_zps349e154d.
got my new shocks mounted up made aluminum spacers so they travel correct
some pics of putting the powertrain back in the beast!
://i126.photobucket.com/albums/p87/jbelain/DSC04041_zpsdeca4994.://i126.photobucket.com/albums/p87/jbelain/DSC04043_zps459fc102.jpg
finally got her bolted in for the last time had a bitch of a time gettin it all in with the trans on the back....had to remove the pass motor mount and then bolt it up when the motor was in place...
://i126.photobucket.com/albums/p87/jbelain/DSC04047_zps8d68931b.jpg
had some help ....from my buddy ....wiser...
she is pretty tight around the firewall but she fits...
://i126.photobucket.com/albums/p87/jbelain/DSC04052_zps349e154d.
bigbeardedbastard
+1y
looks great! hope those motor mounts are strong...the clearance on the firewall looks really tight
evilbill
+1y
the mounts seem to be rock solid ...time will tell, the firewall is ridic close to the bell housing but it doesnt hit at all
the mounts seem to be rock solid ...time will tell, the firewall is ridic close to the bell housing but it doesnt hit at all
bigbeardedbastard
+1y
are they solid motor mounts or rubber or poly?? i'd just be concerned with torque flex binding the bell housing against the firewall......something with give either the sheet metal or the aluminum bell housing....just hate to see you get stranded with a hefty repair bill. not to mention the sound of the drivetrain echoing through the firewall because it makes contact.
are they solid motor mounts or rubber or poly?? i'd just be concerned with torque flex binding the bell housing against the firewall......something with give either the sheet metal or the aluminum bell housing....just hate to see you get stranded with a hefty repair bill. not to mention the sound of the drivetrain echoing through the firewall because it makes contact.