midnightmike
+1y
thanks guys! i used dupont truck bed liner, i bought it from the local part store, it need to be sprayed on, so i bought the gun for it too, it costed about 100 all in all, and it holds up good, its on thick too, real easy to do, i just grinded down the surface rust and welded in the holes i drilled into it from the old setup,took the hammer and dolly to some dents i had, (no bodyfiller by the way) lots and lots of sanding and and masking and i sprayed it on in about an hour, it was dry to the touch with in 45mins, but about 24 hours it it fully hardens... let it sit in the sun, it helps