Pipe notches

cool thanks. so the lines just plug or screw into eachother and thats that? its that easy?

yes, you'll see what i mean when you get under there

your truck looks amazing with the 4x4 plastic flares

i like your bell better.

pic for reference

how big of a pipe was that?

hey guys i need help right now! im in the middle of taking the proportioning valve out. and it seems the screw on the end of the line are different so where do i plug and reroute? i was thinking after the rubber line off the axle theres a bracket, then i just screw in the line that comes from the front. is that the place where i reroute it?

HELP NOW haha im in the midst of this

yes thats right, you just bend it around to the bracket going to line to axle. then you will bleed on the other side of axle and unplug antilock under seat.

ahh i hooked it all back up cause it was like -20 and too cold lol it just seemed like different sizes ones 3/8 ones 7/16 but they have the same thread? i didnt want to bend it around before knowing. so the "S" line going from the rubber line on the axle to the valve is taken out altogether then right?

yes