Installing a Weber on my 84 b2k. HELP

Can anyone help me with photos would be Great,

IM getting ready to install my brand new 32/36 carb on my truck and i wanna know what Vacuum CRAP i can eliminate now ? If it wont hurt anything i would like to loose it all except the vac advance of course.

Also any Tips or Trick .??

Yeah lose all that extra junk.

ok whats junk whats not im pretty un knowledgeable with these motors.
does the kit come with block of plates for the deals on the intake or do they stay ?

all the vacume lines are junk get rid of them all except the vacume advance and there is a port on the carb for it... all but the windsheild wiper wires coming out of the passenger side fire wall is junk cut them out but be carefull as the wires for the wipers for some reason are run through them so you will have to sort those wires out of the harness before you cut it there are i beleive 3 maybe 4 what look like relays that are by the battery they can go to. ill post a pic of the under hood of my truck in a little while weather is pretty bad right now be sure to buy a box of assorted vacume plugs as all the vacume ports are going to need plugged, some kits come with an egr block off plate if yours did not then you could either make one yourself by cutting it out of a peice of aluminum or leave the egr valve on the engine and not hook the wires or vacume up,

i forgot to state that you can leave the fuel canister which most people prefer because you will not smell raw gas ever as i do from time to time in mine personal prefrence there i didnt notice a difference in running with or without

these things are the plugs you were talking about that have knobs on them the wire are going tords the driver side it looks like ...?
Pics would be Awesome! .. ok so the Egr is the thing in the intake under the carb ?
heres some pics sorry i dunno how to use my camara yet I just got it this morning to take these pics., and build progress pics
cLICK TO SEE



POINTING WITH THUM AND FINGER

The left arrow in the "what's this" section is your fast idle "pod" It engages when you turn the a/c on. I'm still fine tuning the rest of your pictures.
Let me ask you this, how many vacuum ports does the weber have?

im am still waiting on delivery i am doing the tear down now. i got the W0133-1598940, for the year of my truck and month it was made , which it says in the door is a 83 lol

the carb itself has 1 vacume port for the vacume advance and yes the egr valve is right below the carb i never got to take any pics today as it was raining untill it got dark but ill def try to get it done tomorrow i know pics help

there's what Im down to.
SO what are you guys using to plug the holes on the exhaust.

Fuel Psi Reg REAlly? should i just get a lesser pump ?BEst optioin ?/?

Weber Jet issues? i have read some about tuneing issues i am in a flat area.. no mountains no hills. not coastal.,should i get a jet kit how many of you needed to jet your carb ?????



??Also anyone have any thoughts on port matching?
polishing out the intake ??


Should i be running non ethanol gas?
Mid low high whats this motor really going to run best with ?