Adding Cruise Control

I added aftermarket Audiovox cruise control () to my '88 B2200 SE in 2003. It was $99 at AutoZone, complete, I didn't need any additional vacuum cannister. There was an extra throttle connector position on the stock carb which made this easy, as the kit came with several throttle adapters. I didn't need to put any magnets on the drive shaft either, it pulled the signal from my coil. Two years ago I updated to a weber carb and thenattached the cruise control cable around the stock accelerator cable but I had to make some simple standoff brackets for the CC cable (photos of this on ). For mine, I did need to call Tech Help once and then re-set the dip switches so it wouldn't cut out over 80mph.

I have a new and a used factory cruise unit complete for a 86-93 B series.I also have a new column stalk that has cruise on it.Offers accepted.I also have the wiring instructions for the cruise.Will be glad to copy and send to anyone who needs them.The cruise units are Maz factory produced but were dealer add-ons.BJ

My 86' has cruise, but I need the servo on the drivers fender well

is a "Cruise Main" switch for the dash and there is a switch on the brake pedal u also need.BJ