trying to put in fuel cell in b2600i

i am trying to put this in. and i need to know what fuel pump to use . it is efi what psi do i need.do i need more than just a fuel cell and fuel pump.

stock pressure is 38-42psi. one of the holley inlines will work excellent.

I believe the Fuel Pump you are looking for is the Holley Blue



Try that link out?


Good luck!



Dev

So what do you do because the FI have 2 supply lines and 1 return line dont fuel cells only have 2 ports tell me if im wrong

Any Fuel Cell that I have seen has 4!

2 on top
2 on the bottom(side)

Hmm....



Dev

And you will need more than just the Fuel Pump and Fuel Cell to get this thing plumbed!


You will need either some hard line and or braided hose! You will also need AN Fittings whether it be -8AN, -6AN

You would be better off if you put in a Check Valve in the system and possibly a Second Filter inline!

You can get all this stuff relatively cheap from Summitt Racing!

Good luck!


Dev

devb22, that holley is only good for 14 psi, it won't support the efi on his mazda......good shot though....

just as an example, here is one that ought to work



and a regulator

Thanks for the correction!

Sorry for the misguidance!




Dev

my fuel cell only has 2 outlets and 1 vent will this work

can i use my vent for my return line and drill and tap a hole for a fitting for a vent.