i started to work on my xtra stock motor

one other thing, do you have a chiltons or haynes to go buy? if not i'd get one!

oh, on the pilot bearing, & throw out bearing, they won't come with the gasket set, you usually get a t.o. bearing with a clutch kit, and the pilot bearing you'll have to buy seperatly.

"i would be more lost than a cricket in a hubcap.... damn i aint no motor man......."
_________________



meh there like women....there all the same on the inside..and they haven changed a bit in the last hundred years

post deleted

I GOT A PRICE TO GET MY HEAD PORT & POLISHED THE BIGGEST IT COULD GO FOR 600 FROM SOME OLD GUY IN A MACHINE SHOP IS THIS A GOOD THING OR NO PS SORRY 4 THE CAPS LOCK WRIGHTING

tis just my opinion, but i would get it extrude honed

no matter how steady of a hand an individual has, even if you flow bench each runner to the same cfm, there will be imperfections from it being hand done, which could lead to slightly different air fuel mixtures in each cylinder. where as, if you extrude hone it, all runners will flow exactly the same cfm, and have the same air flow pattern in them, consistantly making the same air fuel mix.

i would if i knew what i was looking at price wise i heard that was exspensive if its not too crazy maybe i will do ya know what they go for

not too bad price wise, look half way down the page,



4 cyl alum head stage I=$650 stage II= $730

i email them & asked what it would cost for them to do my intake & head together, $385 for the intake & $650 for the head = $1035...

keep in mind that this won't drastically increase the size of your runners, but rather smooth out the factory imperfections, if you were to let someone with a real steady hand increase the runners as much as possible, and then run it thru this process to get rid of the human imperfections, that would give you the best outcome.

first let me say thnx a lot for all the info and also would you happen to have the number that you called for this place

no problem, glad to help!

yeah, here's the contact info:

Rick Miller
Extrude Hone Corp
1 Industry Blvd
Irwin, PA 15642
1-800-613-1065

i dont care what they say about cha your great jking lol thanx bro