Any help there is a plug in a tube and i want to know why???

with the tube plugged the egr shouldnt work properly. on that thread i linked, im still trying to figure out any negative effects of taking all the egr stuff off. so far i havent found any. try reading through that thread. the 3 hoses that go to the black housing on top of the carb plug in to reed valves btw, just wanted to mention that because the term is used in that thread a few times.

post a picture if you can

i will try later today

Ya get a pick up of what you are looking at and in the air cleaner at the front there are 3 hoses lines and certain models did have a plug in one..

oh i dont know if i can get a pick but i will try i dont have a camera lol

post deleted

what happens if i was to remove all the reed valves and block up where the hoses enter the manifold. check out this thread if you dont mind.
i want to remove all the egr stuff.

i pulled all the smog crap and vacuum lines off my engine when i installed my header like 3 years ago. i had to adjust my timing a bit, but other than that it runs bitchin.