mitsu gsx motor

it WILL bolt up to the 87-88 b2600 bellhousing but not the tranny.... i have test fitted it. .

what do you mean bell, but not tranny?

the clutch doesnt fit? surprise surprise, there is going to be some work involved. if it bolts to the bell, how can it NOT bolt to the bell at the same time as the tranny?

am i being screwed by your terminology here?

i was drunk when i wrote that sorry lol. refer to the link to clarify..

The link is refering to using a b2600 bellhousing with rx7 transmission for a wideblock 4g54 swap, not a narrowblock 4g63 swap

so in other words the mm tranny is the only tranny that is goin to bolt up to the 4g63 and no mazda tranny? is this the case?




-justin

no


its for a wide block 4g63, mitsubishi calls it a G63B its found in non north american turbo starions and some trucks.

the original question didn't say narrow block, it said 4g63. wide block g63's from late 90's (can't remeber exact year) mitsubishi trucks will bolt right up. in the second part of the question he put 4g63t, which there is a 4g63 wideblock turbo.

yes there are wideblock 4g63s, but they are not seen as much as the many of narrowblock 4g63s