pepboys sells bell tech 3" lowering leafs

so you cant run blocks on the belltech leafs?
cuz i have the middle leafs out, and 3 inch blocks, so i have like 6 inches of drop, or so...

well i had 3 inch drop leafs on my old s-10 with 4 inch blocks, they worked no problem, the leafs are stiff as hell,

and in my mazda right now i have stock springs with a 4 inch block and a 2 inch d-arch, a d-arch is alot cheaper and you could do it 2 inches and use 1 or 2 inch blocks, its still be cheaper and carry more wieght

my d-arch was $100 canadian for both springs 2 inches

what i should have said was if you wont a 3 inch drop then no you dont need blocks but if you wont more then yes you will need blocks

Yes you can.

so is anybody using blocks on the 3in drop leafs?

Yes I am Heres the pic...





Now thats with 17in wheels with 205/40r17 tires. It would look almost the same way with 15in rims and 185/60r15 tires

so u have 3in leafs and 3in blocks then?

yes

I had the drop leafs on my truck with 3 inch blocks a couple of years back and they gave it about 2.5-3" drop in addition to the blocks.

so you guys think theres more advantage to the drop leafs, rather than just taking two leafs out?