Running a viar 380 and 450

from the reviews of several guys with the AZ comps, i wouldnt even worry about running 2 viairs, just 1 one those will be satisfying....guy on ssm claims from 0-100psi less than 1minute, 100-150psi less than 45secs, 150-200 was also less than 45secs...thats a pretty good compressor, he claims it outperforms his old Thomas 4101 compressor, which is a beast

problem with the AZ comps they draw a lot of amps compare to a 450 and 380

mullet's idea would be good...only thing i'd change is run 2 380s on the 200psi tank and run a viair 400 or 420 on the 150psi tank...what he is sayin gis pretty much running all yer valves off of the 150psi tank, and the 200psi tank will be connected to the 150psi tank through a regulator set at 150psi..that'd be a tight little setup, might look into that haha

what size tank a 3 or 5 gallon filled up that fast from the air zenith and im goin to get one for sure now mybe another later

well i was going to do it by running a engine driven compressor to the higher preasure tank.. and that way i could turn the high preasure tank to hop it.. but thats not pratical for every day use.. so would have it regulated to a smaller psi tank for every day use.. and i could hit switches longer on the lower psi tank.. because the bigger tank would keep it regulated to say 150psi.

I run my 2 450s to 200psi all the time my buddy freddy with the pink s-10 ran his 450s to 300 for about 6 months till the check valves stuck and froze, so ya no running 450s to 200 psi aint really a bad thing, if u wanna be fast

well props to you but just letting u know if it blows dont say u werent warned. and id like to see that 450 pump to 300 psi

those times were on a 5 gallon tank

im definately running a air-zenith then and i just got back from the 1021 the edge homecoming concert fall out boy, cold, yellow card, audioslave!!,seether, all american rejects , the vanished, avenged sevenfold, 30 seconds to mars and alot others
man audioslave played there old stuff when they were soundgarden and rage against the machine it was fukin sweet i can barely talk but neways
what kinda valves should i get would GC extreme 250's be fine??

here ya go, heres a pic of his setup, or what use to be it with the 450s till he got engine driven



lol and say i was warned my buddy ran his 450s to 200 psi for at least a year and we ran them non stop for a night for about an hour str8 to 200 psi everytime

besides im going to engine driven by spring lol

GC's are great valves, i personally bought the early version of the 250s and they leaked bad, supposedly thenew ones with blue tops are a lot better...but to be safe grab some 450s, they are awesome

but i personally will run sMCs from now on

i got smc 3/8" valves wish they could hold more than 200 psi without sticking but i cant complain