what size bags!!!

hey i bought 2500 and 2600 2ply contitech bags and i was wondering if i should have used 2600 all the way around???

2500s are good for the front because there not as big and you dont have much chance of rubbing, but usually thats what most people go for is 2500s all the way around of 2500s up front and 2600s in the rear, but its not really a problem with the setup you got going on.

which will give me more pop cause the 2500 fill faster but the 2600 hold more air cause there bigger and more lift

cause i want some hop at 200 psi
my friend with the green gmc in photo post has 2600 all around and he gets his off the ground a couple inches at a 175 psi

I'd run 2500's up front 2600's will make it a pretty tight fit...2500's will fill up faster and get u to hop easier b/c there a littler bag..

to fit a 2600 in the front w/o rubing you'd have to cut into the frame a little bit

the conti's should do just fine, aint their rating in the 300psi range?

yea i think its 250 or 300psi
but i should get my truck off the ground with my 1/2" smc valves right??

Yea it should come of the ground..You sure are worried about hopping that thing..lol...

I've seen many trucks hopping on 3/8 smc's..

^^ yea i was bout to say that, 3/8 smcs with 1/2inch line got this guy with an std cab s10 3inches in the front with a v6 @ 200