baggin it

well here in the next few months i should have a decent about of money saved up. the one thing i wana spend money of right now is bags. now if i bag the whole truck will i be able to lay out 14s without cuttin up my bedfloor? i also saw somthin where somebody installed his compressors and bolted it to the frame. would all of that be possible. and one more question is i want a decent system i dont wana be able to hop it but i wana notice it airin up. what would yall suggest for that and how much will it cost.
installation is also another but deal. my girlfriends dad is a welder so he can do all of that but is there anything that we wont be able to do that hasta be done pro or anything or is it mostly explain itself as u go. thanks alot -bf

laying out on 14's might be possible with a rubberband tire and baby c notch.make sure you cut your bottom control arms wider where they bolt up to the frame.yes its possible to bolt the comp. to the frame with no problems.as for cost that depends on what you wanna do.just front and back or f.b.s.s. a 1/2 inch system would be your best bet with maybe a 3/8 dump that way its more adjustable.and the closer you mount your valves to the bag the quicker it will lift.as for the welder and what not that depends on his and your fabrication skills.

i had 195/60/14s and it layed frame in the rear but the tires rubbed. The front was bottomed out on the fenders.

Go with 3/8" line and valves, and if possible, get 8 valves instead of 4. Not for side to side because thats gay, but for adjustability.

ya ridin down the road and having ur truck lean a lil to one side and only having 4 valves blows

well lemme asked this to all of the bagged guys. if i dont get 2 personal, how much yall got in ur suspension and what do ya got. im perdy new to this whole air ride stuff, iv saw it and been round it alot in my life but never knew all the technical things bout it. thanks -bf

also, could i get yall to make me a list of parts just so that ill know. the kits for 8-900 on ebay are shitty aint they? -bf

I have around 1000 to 1200 in mine

depends on if you do it urself.

i have $800 in mine

ok so i need compressor, air take, air line, fittings, bags, bag brackets, notch, switches, gauges...and everything else that would be in the kit which would normaly total = ?
i found a wishbone and a 4 link for the same price on suicide doors which was $289
so theres around $700 in air things then 300 for a 3/4 link which would total $1100. after that has been answered, it brings me 2 me next question, iv never done any of this but i can ask questions on here, get a welder, have it pro. welded...i can have everything done EXCEPT put it indoors. so id hafta have it done asap so whats the fastest that yall think that i could have it done?
and....are there any downfalls to using a 3 link to a 4 link.
any other tips will be awesome but now im thinkin bout holdin off till next spring for this and this summer gettin wheels and suicide doors but im not sure. im just tryin 2 get some info gathered in advance. thanks alot yall -bf
and....slammed83, i live in ashland so u could just come up here and install mine for me. haha justkidden but did u put urs in urself?